This experiment was actually a demonstration of the project of our senior, Jayganesh Rajaraman. The processor used was TMS320F28375 and the code execution was done in the software called "Code Composer Studio" which is a software provided by टेक्सस इंस्ट्रुमेंट्स (TI).
We were then asked to perform basic arithmetic operations as well as logical operations based on the Addressing modes of the DSP kit used in the project. While performing arithmetic operations like Addition, Subtraction and Multiplication,the value of the registers before and after execution was noted. The logical operations such as - LSL, LSR, ROR, ROL were also performed and the change in the value of the registers was observed.
We were then asked to perform basic arithmetic operations as well as logical operations based on the Addressing modes of the DSP kit used in the project. While performing arithmetic operations like Addition, Subtraction and Multiplication,the value of the registers before and after execution was noted. The logical operations such as - LSL, LSR, ROR, ROL were also performed and the change in the value of the registers was observed.
Good to the point description.
ReplyDeleteThanks a lot! This was only the detailed explanation about the basic execution of the arithmetic operations using registers.
DeleteCode composer studio version 3.3 was used to program the DSP processor.
ReplyDeleteYes! The software which can be run as a freeware provided by TEXAS INSTRUMENTS.
DeleteSpeech recognition was used, which is an application of dsp.
ReplyDeleteDSP has major applications in the field of Speech synthesis, i.e., Noise cancellation, Speech recognition and many more.
Delete